|
Our Product... |
| |
 |
| CAN Trainer - Daisy Chain Interface |
The project is used to enable the CAN (Controller Area Network) communication between two nodes. A node transmits the message
continously and the other node receives the message. The received messages are then sent to PC using RS-232 protocol. A GUI is created in
PC using VB which contains Tachometer, Speedometer and Gear in the display. All the values will get updated
depending uponthe RS-232 input.
Key features of this project:
Hardware Designing for CAN Kits
Drivers for CAN Communication Between two nodes
Instrument Daisy Chain Panel display using VB (Visual Basic) |
| 10.4" TFT Display |
The project is used to display the informations like Speed, Tacho, Fuel Level, Date and Time to the user through 10.4" TFT display. The TFT is
driven using ARM controller and the input for updating the display is provided by Master. RS-232 protocol is used as the communication
medium between the Master and ARM.
Key features of this project:
Displays Speed, Tacho, Fuel informations
Interfacing of RS-232 protocol between Master and ARM
TFT drivers for displaying the informations |
| 3.5" TFT - Touch Mobile Demo |
The project is used to provide an demo on all kinds of drivers like Audio, Video, Application, ouchScreen, USB, SD/MMC Card etc... Linux
OS is ported with required drivers into the ARM9 for this demonstration.
Key features of this project:
Porting Linux OS into ARM9
Kernel compilation for drivers like Audio, Video, TouchScreen, SD/MMC Card etc... |
| Single Phase Analyzer |
The project is used to display the informations like Voltage, Current, Harmonics, RMS factor and all the paramteres of AC/DC voltage in
TFT display. The project displays dynamic updation, sreen transitions and Waveforms depending upon the inputs. A high precision probe
is designed to with the maximum voltage/current ratings.
Key features of this project:
Hardware Designing for Voltage, Current, Harmonics Measurements
Monitoring code to evaluate Voltage, Current changes
Drivers for rendering the informations on display. |
| CAN Simulator |
This project is used to display all the informations that are transferred between two CAN nodes. All the informations that are
transferred between the two nodes will be monitored continously and the messages will be packed in a serial format. The packed
messages are then sent to PC for displaying the informations.
Key features of this project:
Monitoring CAN driver code
Displays information transferred between two nodes
Message filtering
Log of Received Messages |
| |
|
|
|
